Hi,

Just a short entry about the use of the AccelTex HD antenna with the Aruba AP-344 access point.

In this case I would like to use the

ATS-OHDP-245-1011-4NJ-IC

with the

AP-344.

There are no Acceltex HD antennas with RP-SMA connectors, at least I didn’t find any. And the Aruba AP’s mostly use RP-SMA for external connectors.

Because I had to do some research on how to get the Antenna fitted to the AP -connectors, I’ll just put this out there and hope I can help save someone a good 45minute search 🙂

Here we go:

ARUBA AP-344

The AP is dual 5GHz radio capable and there fore has Two sets of 4 RP-SMA connectors.

To keep it simple I will address just one of the 2 sets.

ARUBA AP-344:

4 X RP-SMA PLUG(female)

https://www.arubanetworks.com/assets/ds/DS_AP340Series.pdf

ATS-OHDP-245-1011-4NJ-IC:

4 X N- JACK

https://acceltex.agiliron.net/collateral/files/ATS-OHDP-245-1011-4NJ-IC_Spec%20Sheet.pdf

Hmm that doesn’t fit… although according to the Acceltex the antenna is compatible.

So watch out with that one. We need to go from N-Jack to RPSMA -Plug. That means we will need a Cable/Connector N-Plug to RPSMA -Jack.

So you’ll also need 4

ATS-240-RANP-RPSMAP-5ft adapter cables.

Summary

Single Antenna use (5GHz & 2.4GHz):

1 x AP-344

1 x ATS-OHDP-245-1011-4NJ-IC

4 x

ATS-240-RANP-RPSMAP-5ft

Dual Antenna use (dual 5GHZ):

1 x AP-344

2 x ATS-OHDP-245-1011-4NJ-IC

8 x

ATS-240-RANP-RPSMAP-5ft

If you should find a mistake in my logic or part numbers please leave me a mail!